Showing 1–16 of 370 results
Delivers excellent cut and finish suitable for high gloss finishes on composite surfaces. Blended Wool 9 Inch Buff Pad Screw-On Double-Sided Light Cut
Delivers excellent cut and finish suitable for high gloss finishes on composite surfaces. 100% Wool 9 Inch Buff Pad Screw-On Double-Sided Heavy Cut
Delivers excellent cut and finish suitable for high gloss finishes on composite surfaces. Blended Wool 9 Inch Buff Pad Hook and Loop Single-Sided Light Cut
Delivers excellent cut and finish suitable for high gloss finishes on composite surfaces. 100% Wool 9 Inch Buff Pad Hook and Loop Single-Sided Heavy Cut
Designed to clean residue from polishing/compounding pads.
3M Citrus Base Industrial Cleaner is an aerosol, all-natural cleaner which will dissolve and flush away dirt, grease, tar, most non-curing type adhesive films, and similar substances. It is a citrus oil based cleaner that emulsifies when flushed with water. It contains no petroleum distillates. It can be used to clean and degrease metal parts,…
Finesse-It Finishing Material Designed for use on topside paint systems to remove Grade Microfine 1500 IMPERIAL WET OR DRY sand scratches, or to remove swirl marks after compounding, while leaving a glazed finish.
Designed for use on topside paint systems to remove Grade Microfine 1500 IMPERIAL WET OR DRY sand scratches, or to remove swirl marks after compounding, while leaving a glazed finish.
General purpose engine degreaser For removal of grease, grime and dirt Safe for under-the-hood rubber and plastic parts
Quick acting, non-streaking aerosol glass cleaner. Effective on plastic (including LEXAN). Will not affect painted surfaces
This liquid compound and finishing material is designed to remove a P600 or P800 dual action sand scratch from gelcoat, with a wool pad. Designed to be used with an air or electric buffer (1500-2500 RPM) equipped with a 3M Compounding Buff Pads.
This liquid compound and finishing material is designed to remove a P600 or P800 dual action sand scratch from gelcoat, with a wool pad. Designed to be used with an air or electric buffer (1500-2500 RPM) equipped with a 3M Compounding Buff Pads.
For pontoons and aluminum boats. Designed to remove oxidation growth and stains and restore a lustrous appearance to bare aluminum. Also removes heavy oxidation and restores shine to most painted aluminum surfaces. We recommend testing on small inconspicuous painted areas to determine suitability. If too aggressive for your painted aluminum, use 3M Marine One Step…
Designed to remove black streaks Safe for use on fiberglass, metal and painted surfaces
3M Marine One Step Clean and Shine Wax is a quick and easy, “spray on/wipe off” product. Excellent for use on wet or dry surfaces. No water needed!
Resurrect the gloss in your boat’s gel coat with this compound / polish that combines an exceptionally fast cutting compound with a finishing material in one. It removes light to heavy oxidation, scratches, stains, blemishes, and fine swirl marks that compounding normally leaves behind on fiberglass gel coat. Contains no wax or silicone. Use by…
No products in the cart.
